Description The FPS SX-F Fuel Polishing and Tank Cleaning System has the following features: Flow Rate: 150 GPH / 568 LPH Ideal Tank Size: 500 to 2,000 gallons (1,900 to 7,600 ltrs) Power: Available in either 120 V / 60 Hz (15 Amp) or 230V / 50 Hz (15 Amp) Pump: 1/3 HP Spur Gear Pump Ports: 3/4 inch Equivalent – JIC 37 deg. Flare Inlet – 1/2 inch Equivalent – JIC 37 deg. Flare Outlet Primary Filtration: Separ SWK 2000/10KD Fuel Filter / Water Separator Secondary Filtration: Spin-On Filtration Secondary Filtration: 3-Micron Water Block Spin-On Filter (Part No. WB-3) – 10-Micron Water Block Spin-On Filter (Part No. WB-10) – 3-Micron (Absolute) “X-Glass” Spin-On (Part No. FFZ-3) – 10-Micron Particulate Spin-On Filter (Part No. FF-10) Suction Capability (Primed): 15 feet vertical lift or 100 feet horizontal run (lines >1 inch, primed) Pressure Gauge: Primary Filter to alert for filter changes Fuel Conditioner: LG-X 500 Controller: SFC-50 Automated Filtration Controller Alert/System Shut Down: Leak Detection, High Vacuum & High Pressure For more information, go to the FPS SX-F Compact Fuel Polishing and Tank Cleaning System product page The Optional Automatic Water Drain (AWD) System may be included in this system. The AWD includes PLC Control, a WATECT 550 Water Sensor, water strainer, and a 15 gallon reservoir barrel. The barrel includes an overflow protection switch to over-ride the drain process if the barrel is full. A floor stand is available to support the barrel separately and a 200 watt strap heater is available separately to wrap around the barrel to help prevent the contents from freezing. Note: – an additional crate charge will be required !WARNING! This system is not meant for use with gasoline or any other flammable liquids having a flash point less than 100°F (37.8° C). Use with gasoline or any flammable liquids at a temperature exceeding their flash point presents an immediate explosion and fire hazard.
